Babar2009
About Me
Professional HSE Supervisor with nine years multinational experience. I have
started my career from Weatherford Drilling International Pakistan, as a Rig
safety training coordinator; I remained attached with drilling as well as workover
department for one year and nine months. Then I joined KCA Deutag, Pakistan
as HSE Officer and worked there for three years and three months after that I
worked with CNPC Chuanqing Drilling Engineering Pakistan (CCDC) as HSE
officer for two years and six months, than I joined CNOOC Iraq as HSE
Supervisor in December 2018 and worked until Sept. 2019. I joined Halliburton,
Dammam and KSA as HSE coordinator via third party GET and worked until
Dec. 2020 and came back to Iraq in April 2021 with CNOOC as project resumed
in Buzurgan oil field and till now working with CNOOC.
Education
University of Wah 2010
BSc Mechanical Engineering
4 Years Engineering Degree in Mechanical
Eurolink Dubai 2012
NEBOSH
NEBOSH IGC
Work & Experience
CNOOC Iraq 12/01/2018
HSE Supervisor
To perform documentation related to HSE issues on daily, weekly and monthly basis. Performed audits and inspections in the assigned area and on work site locations Establish and ensure proper function of STOP tour roster. Conduct joint STOP observation To develop and review all the procedure as per the operational requirements. To provide training on the safety management system (PTW – STOP – fall protection – confined space entry – hazardous materials – hand & finger injury – General safe work practice etc. Proficient in STOP for supervisors and using its techniques. To promote the use of STOP for employees to the personnel under his supervision. To update and maintain training matrix and send out crews for external trainings. To ensure that all the waste generated during operation is being disposed as per HSE rules and environmental regulations. To periodically review stock levels of safety equipment and prepare material requisitions as required. To conduct emergency drills (fire, H2S, blow out, oil spill, medivac, man overboard). To perform verification of gas release incidents during drilling operations. To make sure that all manual and electrically operated tools and equipment’s are guarded properly, safe to operate and PPE (personnel protective equipment) is properly maintained and checked. Monitor operation and provide advice as appropriate with regards to Standard Operating Practices (SOPs), risk assessment, job procedure and hazards identification. Coordinate, assist and assure delivery of relevant training as per requirement. Provide advice and assist in case of incident/accident Investigations. Assure the proper hazards observations. Provide proper and timely reports, as required to regional head office.
Halliburton Saudi Arab 11/01/2019 - 12/30/2020
HSE Coordinator
To perform documentation related to HSE issues on daily, weekly and monthly basis. Performed audits and inspections in the assigned area and on work site locations Establish and ensure proper function of STOP tour roster. Conduct joint STOP observation To develop and review all the procedure as per the operational requirements. To provide training on the safety management system (PTW – STOP – fall protection – confined space entry – hazardous materials – hand & finger injury – General safe work practice etc. Proficient in STOP for supervisors and using its techniques. To promote the use of STOP for employees to the personnel under his supervision. To update and maintain training matrix and send out crews for external trainings. To ensure that all the waste generated during operation is being disposed as per HSE rules and environmental regulations. To periodically review stock levels of safety equipment and prepare material requisitions as required. To conduct emergency drills (fire, H2S, blow out, oil spill, medivac, man overboard). To perform verification of gas release incidents during drilling operations. To make sure that all manual and electrically operated tools and equipment’s are guarded properly, safe to operate and PPE (personnel protective equipment) is properly maintained and checked. Monitor operation and provide advice as appropriate with regards to Standard Operating Practices (SOPs), risk assessment, job procedure and hazards identification. Coordinate, assist and assure delivery of relevant training as per requirement. Provide advice and assist in case of incident/accident Investigations. Assure the proper hazards observations. Provide proper and timely reports, as required to regional head office.
CNPC Chuanqing Drilling Engineering Company Ltd. Pakistan 02/01/2016 - 08/30/2018
Safety Officer
Implementation of overall HSE Management System for achieving company business objectives through the application of HSE policies. Ensure Fire/Lifesaving equipment’s (Life buoys, SCBA systems, H2S escape masks, Fire extinguishers, Hose reels, Fixed foam monitors etc.) onboard or plant installation is properly maintained as directed by the division HSE department Monitor daily operations, particularly high risk activities to ensure compliance to Company’s HSE policies and systems. Implement IADC requirements at project & relay any relevant IADC updates drilling crews. To assist rig manager in keeping the facilities safe and effective in order to ensure health and safety of all personnel onboard. Close monitoring of installation, maintenance activities, hook-up &commissioning (Lifting, height works, confined space, hot works, hydro testing, chemical cleaning process, purging, pigging etc.) in different platforms, barges, rigs, and supporting vessels To implement environmental codes and procedures to ensure compliance with governmental and international regulations. To perform documentation related to HSE issues on daily, weekly and monthly basis. Performed audits and inspections in the assigned area and on work site locations Establish and ensure proper function of STOP tour roster. Conduct joint STOP observation To develop and review all the procedure as per the operational requirements. To provide training on the safety management system (PTW – STOP – fall protection – confined space entry – hazardous materials – hand & finger injury – General safe work practice etc. Proficient in STOP for supervisors and using its techniques. To promote the use of STOP for employees to the personnel under his supervision. To update and maintain training matrix and send out crews for external trainings. To ensure that all the waste generated during operation is being disposed as per HSE rules and environmental regulations. To periodically review stock levels of safety equipment and prepare material requisitions as required. To conduct emergency drills (fire, H2S, blow out, oil spill, medivac, man overboard). To perform verification of gas release incidents during drilling operations. To make sure that all manual and electrically operated tools and equipment’s are guarded properly, safe to operate and PPE (personnel protective equipment) is properly maintained and checked.
KCA Deutag , Pakistan 10/15/2012 - 12/03/2015
HSE Officer
Provide support to Project and Operation team in all aspects of safety, occupational health, safety and environmental issues Support the HSE Manager in ensuring HSE compliance onshore and perform regular HSE audits in the areas of business and vessel operations. Attend pre-job, planning and client meetings as required on HSE related matters. Assist with developing HSE plans that comply with Company policies and procedures as well as client requirements. Ensure training, tool box meetings, and drills are implemented as part of the company’s onshore training and HSE program, i.e. emergency response systems, etc. Investigate and complete the process for close out of all Accident Investigation Reports and prepare/submit lessons learned to the Regional HSE Manager for promulgation to the management. Provide HSE aspects of Company Bid Submissions as requested. Assist in the development of project specific HSE procedures. Conduct HSE trainings and orientation to all new employees. Ensure all worksites are HSE compliant with Company policies and safety standards
Weatherford Drilling International, Pakistan 12/10/2010 - 08/20/2012
Rig Safety Training Supervisor
Directs and coordinates Quality, Health, Safety & Environmental activities Weatherford for in accordance with Weatherford Quality / Rig / HSE Management Systems. To demonstrate and promote safety leadership to ensure all rig personnel understand and comply with all Weatherford Quality and HSE requirements. To advise rig personnel on QHSE matters. To provide QHSE support on-site as required. To ensure all reporting meets Weatherford requirements in a timely manner. Personally responsible for own safety and conducting ones self to the standards of Weatherford Policies and Procedures Coordinate with the Rig Manager and Area QHSE involving QHSE concerns. Consult, advise and direct Drilling Operations in matters relating to QHSE. Liaison with Operator in regards to QHSE matters. Maintaining internal and external reporting according to established systems Participation in, and coordination of, rig HSE meetings Ensure rig complies with Weatherford requirements. Maintaining and updating Rig evacuation plans, procedures and measures. Provide information to Management on accidents/incidents in a timely manner according to established operator procedures. Monitor compliance against the monthly HSE schedule. Coordinate with the Rig Manager concerning the implementation of the Rig Management. System on-site and the ongoing instructions to all personnel in it’s use. Monitor/chair/participate in regularly scheduled HSE meetings held at rigs and camps. Oversee implementation of operational systems and procedures to include but not be limited to: Permit to Work System, Lock-Out/Tag-Out System, Hazardous Chemical -MSDS, PPE System, H2S Awareness, Benchmarking, and other required training activities. Execution/Reviewing/Monitoring of required QHSE inspection for rigs and camps, reporting findings to the Rig Manager Maintenance of the Lifting & Slings Registers and Inspection Program for rigs in area Support the HSE Manager and team with planning, coordinating and implementing of effective HSE policies, guidelines and procedures to ensure that the department objectives are met. Reporting of QHSE data, and observations / interventions QHSE trainings as per WDI modules and client requirements.
Portfolio
